E-glass needle mat is a new fiberglass reinforcement product. The needle mat is made from continuous fiberglass strands randomly looped and laid on a roving matrix, then needle stitched together. Needle Mat is primarily used in fiberglass molding processes such as GMT, RTM, etc. Typical products are automotive running boards, architectural panels, large industrial panels and other FRP products.
Product Characteristics Technical specifications 1. No binder or other knitting material used to
bond the mat together.
2. Good resin flowability. Quick wet through. No
white strands.
3. Strand has good resistance to washability and
suitable for RTM and other molding processes.
4. The mat is not easy to cut, therefore the mat
is suitable for thick molded components.
5. Needle mat easily fills the mold and conforms
to complex shapes, while providing a smooth
finished surface. R2O Content <0.8% content ="0.2%"> Products Specifications Product Code NM214 NM234 NM312 NM212 Applicable Process Glass Molded Thermoplastics (GMT) Press molding of large panels Vacuum Resin Transfer Molding (RTM) Injected Resin Transfer Molding (RTM) Resin Compatibility Polyester or Epoxy Polyester or Epoxy Polyester or Epoxy
Unit Weight
(g/m2)300, 450, 720 900, 1050, 1250 300, 450, 600 300, 450, 600 Additional Information -- Combination of Woven Roving & Needle mat High voltage insulators -- *Standard mat widths are 1460 mm and 1500 mm. Special products are available according to customer’s requirements. Packaging
Needle Mat products are rolled around a mandrel with an inside diameter of 7.6 cm. Roll diameter is 30 cm. Rolls are wrapped in plastic bags, then packed in cardboard boxes. Individual rolls weigh between 15 kg and 20kg. There are 12 boxes vertically packed on a 96cm?128cm pallet, which is shrink-wrapped with plastic film.
Labels: E-glass needle mat, fiberglass mat, fiberglass needle mat, needle mat
